Here’s where the HPBA stands on these legislative issues.
The Hearth, Patio & Barbecue Association (HPBA), based just outside of Washington, D.C., is the North American industry association for manufacturers, retailers, distributors, representatives, service firms, and allied associates for all types of fireplace, stove, heater, barbecue, and outdoor living appliances and accessories. HPBA provides professional member services and industry support in government relations, events, market research, education, certifications, consumer education, and industry promotion.
HPBA is the leading and recognized voice of advocacy for the hearth, patio, and barbecue industry. The statements below outline HPBA’s positions on key issue areas and are meant to serve as a reference for HPBA members and the public interested in HPBA’s position on a particular issue. As policies and issues evolve, these statements will be updated to reflect the industry’s latest positions.
Position Statement: HPBA, in partnership with the U.S. Environmental Protection Agency (EPA), local governments, and industry partners, supports the development and implementation of wood stove changeout programs.
LEARN MORE ABOUT CHANGEOUT PROGRAMS
Issue Summary: A wood stove changeout program is:
HPBA strongly supports the creation of a national changeout program in both the U.S. and Canada with annual authorizations targeted at the lowest-income households.
Position Statement: HPBA supports efforts to increase transparency, accountability, and the role of small businesses in developing regulations within every federal agency.
Issue Summary: Many of the federal regulatory issues facing the hearth industry relate to a lack of accountability and requirements for federal agencies as they develop major regulations. The Small Business Regulatory Flexibility Improvements Act (H.R. 33; S. 584) is a bill that would require agencies to analyze the impacts on small businesses affected indirectly.
Notably, the bill would amend the Small Business Regulatory Enforcement Fairness Act (SBREFA) of 1996 to require agencies, in developing small entity compliance guides, to solicit input from affected small entities or associations of small entities. At this point, the SBREFA only applies to the EPA and to OSHA; therefore, this would help small businesses and increase accountability for agencies like the Department of Energy.
Position Statement: HPBA encourages states and local jurisdictions to incorporate a hearth specialty license credentialed in part by the National Fireplace Institute (NFI) into their code in order to ensure the safe and appropriate installation and servicing of gas and solid fuel hearth products. HPBA created model language that can be used to establish a hearth specialty license under a state or local jurisdiction’s HVAC-R, mechanical, or other code.
Issue Summary: Fireplaces, hearth products, and systems are unique products that bring fire into the living area of the home. Potential problems related to improper installation may be concealed and may not manifest themselves for a considerable time after installation. There are a wide variety of fuels, appliances, venting systems, installation instructions, codes, and standards that require specialized knowledge. Credentials establish a bar for qualifications and thereby help to prevent potentially dangerous practices.
Appropriate and effective credentials should be specific to the product. Competence cannot be reliably predicted by general qualifications that include dissimilar products and that do not adequately cover knowledge of fireplace products installations. Exclusion of demonstrably appropriate fireplace-specific qualifications unfairly prevents highly qualified professionals from practicing their trade, earning a livelihood, and contributing to the economic welfare of the region/state. The NFI exams are singularly focused on fireplace products. The exams are developed and maintained in accordance with national testing standards, including a job analysis basis.
Position Statement: While HPBA continues to support the broad principle behind EPA’s Lead, Renovation, Repair and Painting (Lead RRP) Program – that of protecting occupants, especially children under the age of six and pregnant women, of residential dwellings from lead hazard exposure – HPBA remains disappointed with EPA’s removal of the opt-out provision, lack of enforcement of the laws, and the lack of a commercially-available lead test kit that meets both the positive and negative response criteria. HPBA looks forward to working with EPA and other stakeholders to address these concerns and possible solutions.
Issue Summary: On April 22, 2008, EPA published a final rule on the Lead RRP program pursuant to the Toxic Substances Control Act (TSCA). TSCA requires EPA to establish regulations that apply to renovation or remodeling activities in target housing that create lead-based paint hazards. Target housing includes, with some exceptions, any housing constructed prior to 1978. The statute calls on EPA to craft regulations in a reasonable and prudent manner and to consider the economic impact of any regulatory action.
EPA finalized an amendment to the opt-out and record keeping provisions of the program on May 6, 2010. Clearance and clearance testing requirements were established by an August 5, 2011, final rule. Complicating this rule is the reality that reliable lead test kits do not exist. Imprecise test kits result in false positives (test results inaccurately indicating the presence of lead) and servicers having to assume the presence of lead in pre-1978 housing.
Position Statement: HPBA supports a new tax credit under Sec. 25(C) which encourages consumers to make energy-conscious purchases that improve air quality, lowers heating expenses, and promotes economic growth.
LEARN MORE ABOUT THE CURRENT STATUS
Issue Summary: A federal tax credit recognizing the efficiency and value of today’s biomass heating appliances has long been supported by the hearth industry. A new tax credit, Sec 25(C), created by The Inflation Reduction Act (IRA) removes our products from Sec. 25(D) of the tax code where appliances were eligible for an uncapped 26 percent tax credit in 2021 and 2022. Beginning January 1, 2023, qualifying appliances are eligible for a tax credit under Sec. 25(C). This new 30 percent tax credit – capped at $2,000 annually – is available for appliances installed between January 1, 2023, and December 31, 2032. The credit can be used on the purchase and installation costs of qualifying appliances, but it is now only applicable to existing homes. To be eligible for the tax credit, an appliance must have a thermal efficiency of at least 75 percent per the higher heating value (HHV) of the fuel. More information can be found in the link above.
Position Statement: HPBA strongly supports the safety barrier standard for new glass-fronted gas fireplaces as it protects at-risk populations, such as young children, from serious burns. While the new safety screens are important in avoiding direct contact with the hot glass, understanding the potential hazards and offering constant supervision are both vital to preventing burns.
LEARN MORE ABOUT OUR EFFORTS TO IMPROVE SAFETY
Issue Summary: HPBA led the industry in creating a voluntary standard for all new gas fireplaces and glass-fronted gas heaters to help reduce the risk of burns in young children and others. The approved standard requires the installation of a protective barrier on affected products (i.e., the appliance’s glass surface temperature exceeds 172 degrees Fahrenheit). Effective January 1, 2015, this standard was a result of more than four years of research, testing, and discussions with the U.S. Consumer Product Safety Commission.
Position Statement: HPBA believes that it is critical to lower carbon emissions based on solid science and technology. Requiring communities to be all-electric does not achieve the intended reduction due to inefficiencies with generation, distribution, and lack of storage. A balanced energy portfolio including natural gas, propane, solid fuel, electricity, and existing and emerging renewable technologies is the most effective way to lower carbon emissions for our planet.
LEARN MORE ABOUT THE CURRENT STATUS
Issue Summary: Forced electrification as a policy is the effort to remove all combustion sources from new buildings. The focus is typically on removing natural gas in new buildings but can include existing buildings and other fuel sources (such as propane and wood). Electrification is an extension of Zero Net Energy (ZNE), Zero Net Carbon (ZNC), and decarbonization concepts. Even if the mandate is not for one hundred percent electric power, the effort may include disincentives for natural gas and propane or other means to push for increased appliance efficiency and carbon budgets for new construction or major remodels. Electrification efforts can be pursued through legislation, and building/stretch codes at the state and local levels.
Position Statement: New technologies now exist that can more adequately replace continuous pilots, which provided an important safety feature, but have required consumers to manually extinguish the pilot on their gas appliances. A phasing out of continuous pilots saves homeowners money and achieves energy conservation when appliances are not in frequent use.
LEARN MORE ABOUT THE CURRENT STATUS
Issue Summary: HPBA has been advancing a revision to the applicable standards for vented gas fireplaces, stoves, and inserts that would disallow continuous pilots at some point in the future. With this phase-out, the industry is able to contribute to energy conservation goals, while considering the unique attributes, functions, and technical considerations of each appliance category. The CSA Group, setting technical appliance standards worldwide, has accepted HPBA’s request for change to phase out continuous pilot lights, sometimes referred to as “standing” pilots, by 2022-2023.
The standards are being revised independent of federal regulatory efforts and will disallow continuous pilots on newly manufactured products currently covered under the ANSI Z21.50 and Z21.88 standards. The target effective date was identified with the acknowledgment that it may take time to perfect some control technologies that will be used in replacing continuous pilots. Vented gas appliances have been lightly regulated in Canada for many years (test-and-disclose provision of P.4.1), but multiple regulatory agencies are considering additional regulation on a wide range of gas-fired appliances, including labeling provisions, minimum efficiencies, and bans on continuous pilots.
Here’s what’s included:
Don’t keep running on the hamster wheel without any help. Instead, join a community that can foster your growth and become a leader who shapes the future of our industry.
